Jump to content

Koden Radar Losing Definition


Recommended Posts

Hi

I have been asked about a problem with a Koden Radar. It is losing definition on all ranges. Larger targets like ships and large land masses can be seen but smaller targets just not seen. Unfortunately it has been removed from the vessel so testing a bit awkward. Really looking to see if anybody has come across this type of fault and whether it is fixable through straight forward replacement of scanner or components.

Thanks

Link to comment
Share on other sites

Koden is good kit and generally used on commercial boats.

There are 2 distinct possibilities,

1. Somebody has reduced the sensitivity (finger trouble), or

2. There is a fault in the Raydome which is allowing a wider beam (the width is the beam determines the object sensitivity). The same theory applies if you dont have a Raydome, just an open antenna.

Link to comment
Share on other sites

8 hours ago, JonC said:

I’m not sure how old the unit is and it’s usage but the magnetron does have a limited lifespan. I took my old furuno system into a marine electrics specialist (Mantsbrite) who charged me about £50 to confirm it was fucked🤣

If it is older tech nobody supports it anymore and the default answer is an upgrade. 

True ...........

Also the Furuno use quite an expensive magnetron, IIRC About £400,

Link to comment
Share on other sites

On 9/1/2022 at 2:59 PM, JonC said:

I’m not sure how old the unit is and it’s usage but the magnetron does have a limited lifespan. I took my old furuno system into a marine electrics specialist (Mantsbrite) who charged me about £50 to confirm it was fucked🤣

If it is older tech nobody supports it anymore and the default answer is an upgrade. 

The display is marked as manufactured 2006 so could just be old age. Thanks

Link to comment
Share on other sites

On 8/31/2022 at 10:32 PM, GPSguru said:

Koden is good kit and generally used on commercial boats.

There are 2 distinct possibilities,

1. Somebody has reduced the sensitivity (finger trouble), or

2. There is a fault in the Raydome which is allowing a wider beam (the width is the beam determines the object sensitivity). The same theory applies if you dont have a Raydome, just an open antenna.

Hi, I will sort out a power supply and check out the display settings. If it is the 2nd possibility, is that fixable easily or is it get it to a service agent to repair? Thanks.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...