FG knot puller

[Odyssey]

What’s the best one without breaking the bank? 🙂 

Cheers all 🙂

[suzook12]

I use a spring puller-

https://www.amazon.co.uk/Silverline-416746-Headlight-Adjusting-Spring/dp/B00ZXQTG5Q/ref=pd_lpo_1?pd_rd_i=B00ZXQTG5Q&psc=1

[Ivan Tuna]

7 hours ago, Odyssey said:

What’s the best one without breaking the bank? 🙂 

Cheers all 🙂

Terry at Jigabite could a good sensibly priced selection

[GPSguru]

8 hours ago, Odyssey said:

What’s the best one without breaking the bank? 🙂 

Cheers all 🙂

Use a Bobbin to tie a PR knot ..............

[Odyssey]

59 minutes ago, GPSguru said:

Use a Bobbin to tie a PR knot ..............

Any tips…. 😬😬😬😬

[GPSguru]

2 hours ago, Odyssey said:

Any tips…. 😬😬😬😬

Get a bobbin from Terry at Jigabite and follow the instructions or look at one of the many vids on youtube. TBH the use of the bobbin is pretty foolproof once you have the tension correct, and the knot is the same as an FG, incredibly strong, and can be tied in seconds with a little practise.

 

[Odyssey]

13 hours ago, GPSguru said:

Get a bobbin from Terry at Jigabite and follow the instructions or look at one of the many vids on youtube. TBH the use of the bobbin is pretty foolproof once you have the tension correct, and the knot is the same as an FG, incredibly strong, and can be tied in seconds with a little practise.

 

Ordered 🙂 

[JDP]

Been using a jigging master pr knot bobbin for around 8 years +, plenty of copies out there, even from Shimano.

[Odyssey]

I tried the FG but was a nightmare to tighten up…. So hopefully the PR is easier 🙂 

 

[JDP]

4 hours ago, Odyssey said:

I tried the FG but was a nightmare to tighten up…. So hopefully the PR is easier 🙂 

 

It will take a little practice to get right, once you have a few spins going slide the loops up tight then continue the full knot.