Jump to content

nanni 155hp raw water pump


 Share

Recommended Posts

12 minutes ago, andydavy said:

Does any one know how to remove the raw water pump from the nanni t4.155 (4.380) engine. Mine is leaking from the rear seals. Does it just pull off after removing the two bolts?

Looks like it does just pull off. Only two bolts and nothing else to stop it. Give it a gentle tap with a soft faced mallet and it should come free.

vwdXNs1.jpg

https://www.ricambimotorimarini.com/en/sea-water-pump-970311169b.html

Link to comment
Share on other sites

On 3/19/2021 at 10:47 PM, Andy135 said:

Looks like it does just pull off. Only two bolts and nothing else to stop it. Give it a gentle tap with a soft faced mallet and it should come free.

 

Is that posh for twat it with an ammer mush?

Edited by suzook12
Link to comment
Share on other sites

10 minutes ago, Saintly Fish said:

He followed your advice with the sledge hammer!! 

He can't have done. I didn't advise the use of a sledge hammer! 🤪

Link to comment
Share on other sites

55 minutes ago, andydavy said:

It's the ammer that means i have to buy a new one!

Bigger one? 3lb ball pein shifts most things! 7lb sledge with cut down handle for most everything else........ 🤣

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...