Jump to content

4 Stroke Conversion


 Share

Recommended Posts

13 minutes ago, Saintly Fish said:

🤣 you should get Andy to move this to the humour section. He likes moving peoples threads. 
 

Only where the OP wilfully disregards forum etiquette and crashes other people's threads.

I see no thread crashing here.

Link to comment
Share on other sites

1 hour ago, Scotch_Egg2012 said:

That's a different level of stupid,  can't believe he hasn't even googled them to see the difference

I personally think it is just a wind up - remove strokes from an engine !!! Has to be the believers are the D heads. no offence meant to any of our readers!  Geoff. ☺️

Link to comment
Share on other sites

That one is believable, I am sure that has happened quite often, but should be discovered when the prop will not turn. Geoff.☺️

Edited by Geoff
Link to comment
Share on other sites

7 hours ago, Geoff said:

That one is believable, I am sure that has happened quite often, but should be discovered when the prop will not turn. Geoff.☺️

Or could just be an optical illusion......

Link to comment
Share on other sites

☺️Steve, just take a look at he hub. The exhaust should flare out at the rear - that prop is back to front. I also think that the prop blades would foul on the skeg, but that could be an optical illusion. Geoff.

Link to comment
Share on other sites

3 hours ago, Geoff said:

☺️Steve, just take a look at he hub. The exhaust should flare out at the rear - that prop is back to front. I also think that the prop blades would foul on the skeg, but that could be an optical illusion. Geoff.

Oh yeah..... Doh 🤣

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...